Now fill your spa or hot tub with clean, clear, filtered water. New Pristine Fillï¿½ helps to remove up to 99% of chemical contaminants & suspended solids (including certain large bacteria).
By removing contaminants, Pristine Fillï¿½ helps to reduce & even eliminate many spa & hot tub water quality problems before they can start.
Pristine Fillï¿½ aids in removing:
- 99.99% Chlorine / chlorine dioxide
- Pesticide residues
- Iron rust
- Spores & organic contaminants
- Suspended solids
Filter Made of: 5.0 micron polypropylene sediment removal pre-filter PLUS a 0.5 micron (smaller than many bacteria & protozoan contaminants) (absolute rated) cation resin impregnated Carbon Block.
Pressures: Maximum Pressure - 125 psi, Minimum Flow Pressure - 30 psi.
Operating Water Temperatures: 40° F to 100° F.
Pristine Fillï¿½ has an effective life of approximately 1500 US gallons (5500 liters) providing about 3 to 5 average spa fills plus several make up water top-offs (due to evaporation & splash out). When used simply throw away with your normal refuse. No special handling required.
Use as part of your regular
Purge, Drain & Refill routine.
Protect from freezing and dropping.
Can be used for any spa or hot tub application & any spa or hot tub chemical program or system.
DIRECTIONS for use:
1. Connect to garden hose.
2. Flush filter for 30 seconds.
3. Fill spa to fill line.
4. Store in a cool dry place (most people store it in the refrigerator)
No Longer Available. Look at the
Pristine Blue®, is the original copper based non-chlorine, non-bromine spa & hot tub care product.
If they say it's "just like" Pristine Blue, ask them to
prove it in writing. They can't.